Brick Veneer vs. Brick: Pros, Cons, and Costs
If you’re having trouble deciding between brick masonry and brick veneer for your home, we can help you understand the most important distinctions
Highlights
Brick masonry homes are durable and sturdy.
Brick masonry homes are made from recyclable materials.
Brick veneer homes offer a similar look with better insulation.
Brick veneer is also great at limiting leaks.
Brick houses are attractive and elegant, eco-friendly, and, as the classic song reminds us, mighty, mighty durable. If you’re on the market for a brick house today, one of the first things you’ll have to consider is the difference between the brick masonry construction of many homes from yesterday and the brick veneer siding that adorns most newer builds.
Below we compare brick veneer vs brick across every significant factor so that you can make an informed choice as you weigh the pros and cons of a brick home.
What is Solid Brick?
Brick masonry—also called solid masonry, double brick, or brick and block—is one of the oldest building construction styles in human history. Until the mid-20th century, it was one of the most common types of home in North America.
Brick homes built today consist of masonry walls stacked in at least two layers, which are called wythes. The outer wythe is always brick, but since the inner wythe is not visible, it is often built with less expensive concrete or cinder blocks (which is why “double brick” isn’t the most accurate title). To keep the two wythes held together, the outer wall features a pattern of header bricks stacked sideways to bridge the two layers—though you can also accomplish the task with wires that are not visible from the exterior.
Many older brick homes include additional wythes; in some of those built before the 20th century, the whole wall is up to 20 inches thick.
Pros of Solid Brick
There are very good reasons that people have been building brick masonry homes and refining the process over millennia. It worked out for the most diligent of the Three Little Pigs, after all. Let’s take a close look at some benefits of solid brick.
Durable
Brick masonry is extraordinarily sturdy and, if properly installed and well-maintained, it can last for hundreds of years.
Sturdy
The durability of solid masonry protects against many different elements. The foundation is very sturdy, standing up to earthquakes better than many other options. Bricks are not susceptible to rot and are very difficult for pests to damage.
Fire, Rot, and Pest Resistant
Even better, bricks totally resist fire, acting as a non-combustible flame retardant that will generally contain the blaze to a single room.
Additionally, brick masonry performs better than most construction styles against strong winds and other kinds of weather damage. Depending on your provider, brick masonry’s resilience may result in lower home insurance bills.
Easy to Maintain
For the same reasons they are difficult to damage, brick houses are also easy to maintain. To keep your brick home well-maintained, you will need to regularly inspect the mortar and pressure wash the exterior every so often. Fortunately, this is much less involved than the regular upkeep required of homes built from other materials or even brick veneer siding itself.
Eco-Friendly
Brick homes are also eco-friendly, produced from abundant natural materials that are easy to recycle when torn down.
Cons of Solid Brick
For all of those advantages, there are also good reasons why very few new brick masonry houses are constructed in North America today. These are some of the disadvantages of solid brick worth keeping in mind.
Costly
The first downside that immediately confronts anyone considering building a brick masonry home is the prohibitively high cost, especially once you factor in the cost of a foundation. Brick is much higher in cost than wood or vinyl, and repairs are also more expensive.
Difficult to Repair and Renovate
If you’re considering a brick masonry house today, though, you will almost certainly be buying an older home. Revitalizing masonry and brick in a historic home can be costly and require a certain expertise. Hiring a local mason to fix a bowing brick wall will cost $7,500 to $40,000 for 100 square feet. Major repairs on a cracked foundation can run anywhere between $2,500 and $10,000 or more. Though you should only have to repoint the mortar every 20 to 30 years, the average homeowner pays $8 per square foot to do so.
Any renovations to the exterior of your house will also be more difficult with brick masonry compared to other styles. It isn’t often easy to find bricks that exactly match those that make up the rest of your house—and the costs of adding windows or new plumbing and wiring will be higher than with other types of homes.
Poorly Insulated
Perhaps most importantly, older brick masonry homes are often poorly insulated by today’s standards. While bricks are energy efficient, they are highly porous, allowing moisture to seep in, potentially making the house cold and dank. You can add forms of insulation to improve a brick masonry building’s insulation performance, but the problem is most effectively addressed by brick veneer.
What is Brick Veneer?
So, exactly what is brick veneer? While the word “veneer” suggests to many that brick veneer homes have a thin layer of brick shard or some kind of pseudo-brick material, this isn’t accurate. Brick veneer homes have an outer wythe of real brick masonry.
When it comes to brick vs brick veneer, the difference with veneer is that instead of a second layer of masonry, behind the first wythe lies a gap and then a structure built from another material, often wood. In other words, the brick is something more like siding in a brick veneer home, but the exterior appearance is nearly identical to a solid brick home. During the last 50 years, brick veneer overtook brick masonry as the most common form of a new-build brick home.
Pros of Brick Veneer
The increasing prevalence of brick veneer is owed largely to the expansion of building codes for insulation. Here are some of the most helpful advantages associated with brick veneer.
Modern Insulation
Brick masonry is highly porous, allowing moisture to pass through the walls fairly easily. Brick veneer solves the problem in two ways. First, the cavity between the brick wythe and the building material creates space for air that itself acts as a powerful insulator—and the cavity can, of course, be filled with additional insulation materials, heightening the effect. Secondly, it allows for the home to have a more insulating material without forfeiting the appeal of a brick exterior.
Leakage Limitations
That cavity also allows for enhanced waterproofing. While brick is a great shield against most of the elements, it is susceptible to leaks. Brick veneer homes usually have a set of weep holes that line the base of the cavity and allow water to drain out. The weep holes also allow another wind current into the cavity, which mitigates the amount of rain that can leak in.
Energy Efficient
Bricks are highly energy-efficient, with nearly double the heat capacity of wood. While in a brick masonry home, this advantage can be wiped away with a lack of insulation and moisture leakage, the innovation of brick veneer puts this efficiency to work.
Cost Effective
A brick veneer home is also significantly less expensive to construct than a brick masonry home; adding it to a 2,500 square foot home costs between $20,000 and $70,000. Unlike a house with a brick foundation, you can also do this as an advanced DIY job—but experts suggest that you need at least 50 hours of masonry experience before attempting it.
Cons of Brick Veneer
Brick veneer does not, however, magically reproduce all the advantages of brick masonry while doing away with the disadvantages.
Susceptible to Cracking
One wythe of brick veneer is far less durable than a brick masonry home and can more easily crack.
Doesn’t Protect Against Fire, Pests, or Rot
Alongside being prone to cracking, if your house is wood, you still face the usual threats from fire, pests, rot, and natural disasters.
Difficult to Maintain
Brick veneer also requires additional maintenance compared to brick masonry. Along with the duties and costs imposed by the mortar, you must regularly inspect and unclog the weep holes, annually check the caulk joints that connect the veneer to your home and remove invasive plant growth.
Brick Masonry vs. Brick Veneer: Key Features
Your choice of brick masonry or brick veneer will depend on your priorities, budget, and lifestyle. If you’re unsure which option is right for you, you can always consult a stone veneer professional near you. In the meantime, here are a few major considerations in the brick vs. brick veneer showdown.
Appearance
Only the most discerning eye will be able to tell the difference between the two from the outside by looking at the pattern on the header bricks.
Best appearance: Tie
Options & Customizations
For both brick masonry and brick veneer, your ability to alter the appearance will be limited. Brick generally comes in red, brown, beige, or white, determined by the composition of materials and the temperature at which they’re heated. You can paint this material, but this is a detailed and expensive process. The same limitations apply to both masonry and veneer.
Most customizable: Tie
Durability
If durability is your primary concern, you should opt for brick masonry without question. You’d be hard-pressed to find another building material that lasts as long and remains as sturdy. The durability of a brick veneer home will depend largely on the material with which the home is built—and the single wythe is more susceptible to earthquakes and other environmental factors than a solid brick structure with at least two wythes.
Most durable: Brick masonry
Cost
On the other hand, if keeping costs down is the priority, your best choice will be brick veneer. Brick veneer typically costs $10 to $20 per square foot. For brick masonry, you may need 8,000 bricks at a cost between $250 and $3,730 per thousand—and that’s before you even factor in the additional costs of the foundation and hiring a mason.
Most cost-effective: Brick veneer
Energy Efficiency
Brick masonry’s poor performance as an insulator, due to its high thermal transfer rate, is a major factor in the appeal of brick veneer, which offers the same look with significantly better energy efficiency.
Most energy efficient: Brick veneer
Ease of Installation
If you want to build a brick masonry home, you’re going to need to hire an experienced mason. The technical requirements and know-how required to build a brick foundation are beyond the reach of even the most confident DIY-er.
Paying to install a brick veneer wall will be significantly less expensive—and though by no means an easy job, a determined and handy homeowner can do it on their own if they have masonry experience.
Easiest to install: Brick veneer
Maintenance
Whether you’ve got brick masonry or brick veneer, you’ll enjoy the material’s color retention and resistance to the elements. Both will require occasional power washing to keep looking fresh, as well as repairs to chipped and loose bricks. The additional components required by brick veneer—namely the weep holes and the caulk joints—add extra ongoing maintenance tasks.
Easier to maintain: Brick masonry
Length of Life
When properly maintained, a brick masonry home can last for hundreds of years. With just one wythe, brick veneer has less longevity—and either way, the lifespan of your home will depend more on the materials with which the structure is actually built than the siding. For the length of life, brick masonry is the clear winner.
Longest life: Brick masonry
Eco-Friendliness
Made from abundant clay and shale, bricks are among the more sustainable building materials around. Since homes with brick veneer are likely to be built from less eco-friendly wood or steel, brick masonry will prove the most overall sustainable option in most cases.
Most eco-friendly: Brick masonry